ssh_tunnel statistics: tal-mac-mini to screamer
Time: 2006-Mar-29 15:10:06 Wed
Current tunnel state: disabled Current tunnel condition: DOWN
loader stats
------ loader (pid: 10279 ) ------------ (v3.16 2006/03/23) ----- State: disabled UP
Time: 2006-Mar-23 16:20:34 Thu
client: tal-mac-mini
server: screamer
client heartbeat: Thu Mar 23 16:16:33 EST 2006
server heartbeat: Thu Mar 23 16:16:45 EST 2006
server heartbeat 1: Thu Mar 23 16:16:45 EST 2006
server heartbeat 2: Thu Mar 23 16:12:46 EST 2006
server heartbeat 3: Thu Mar 23 16:08:47 EST 2006
server heartbeat 4: Server Heartbeat 1
Sleep time: 239
loader loop counter: 6
bad port tests: 0
failed file updates: 0
tunnels killed: 4
emails sent: 5
email addresses: john@larsen-family.us
loader started: 2006-Mar-23 16:00:03 Thu
debug flags: 0x0
tunnel stats
------ tunnel (pid: 10796 ) ------------ (v3.16 2006/03/23) ----- State: enabled UP
Time: 2006-Mar-23 16:16:53 Thu
client: tal-mac-mini
server: screamer
client heartbeat: Thu Mar 23 16:16:33 EST 2006
server heartbeat: Thu Mar 23 16:16:45 EST 2006
Sleep time: 239
tunnel loop counter: 3
bad port tests: 0
emails sent: 0
email addresses: john@larsen-family.us
tunnel started: 2006-Mar-23 16:08:35 Thu
debug flags: 0x0
Current users, uptime, and load average
15:10:06 up 6 days, 2:30, 1 user, load average: 0.32, 0.08, 0.02
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
xhliu pts/0 enterprise 14:28 35:24 0.20s 0.20s -csh
Current processes
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Mar23 ? 00:00:00 init [3]
root 2 1 0 Mar23 ? 00:00:00 [ksoftirqd/0]
root 3 1 0 Mar23 ? 00:00:00 [watchdog/0]
root 4 1 0 Mar23 ? 00:00:00 [events/0]
root 5 1 0 Mar23 ? 00:00:00 [khelper]
root 6 1 0 Mar23 ? 00:00:00 [kthread]
root 64 6 0 Mar23 ? 00:00:00 [kblockd/0]
root 74 6 0 Mar23 ? 00:00:00 [khubd]
root 127 6 0 Mar23 ? 00:00:00 [pdflush]
root 128 6 0 Mar23 ? 00:00:00 [pdflush]
root 130 6 0 Mar23 ? 00:00:00 [aio/0]
root 131 6 0 Mar23 ? 00:00:00 [xfslogd/0]
root 132 6 0 Mar23 ? 00:00:00 [xfsdatad/0]
root 133 6 0 Mar23 ? 00:00:00 [xfsbufd]
root 129 1 0 Mar23 ? 00:00:00 [kswapd0]
root 798 6 0 Mar23 ? 00:00:00 [ata/0]
root 854 1 0 Mar23 ? 00:00:00 [kjournald]
root 1185 1 0 Mar23 ? 00:00:00 udevd -d
root 1586 1 0 Mar23 ? 00:00:00 [khpsbpkt]
root 1591 1 0 Mar23 ? 00:00:00 [knodemgrd_0]
root 2020 1 0 Mar23 ? 00:00:00 [kjournald]
root 2443 1 0 Mar23 ? 00:00:00 /sbin/dhclient -1 -q -lf /var/lib/dhcp/dhclient-eth0.leases -pf /var/run/dhclient-eth0.pid eth0
root 2472 1 0 Mar23 ? 00:00:03 syslogd -m 0
root 2474 1 0 Mar23 ? 00:00:00 klogd -x
rpc 2489 1 0 Mar23 ? 00:00:08 portmap
root 2498 1 0 Mar23 ? 00:00:00 auditd
root 2502 6 0 Mar23 ? 00:00:00 [kauditd]
root 2511 1 0 Mar23 ? 00:00:00 hcid: processing events
root 2513 1 0 Mar23 ? 00:00:00 sdpd
root 2528 1 0 Mar23 ? 00:00:00 [krfcommd]
root 2555 1 0 Mar23 ? 00:00:00 ypbind
root 2710 1 0 Mar23 ? 00:00:00 /usr/sbin/automount --timeout=60 /misc file /etc/auto.misc
root 2715 1 0 Mar23 ? 00:00:00 /usr/sbin/automount --timeout=60 /net program /etc/auto.net
root 2788 1 0 Mar23 ? 00:00:00 /usr/sbin/automount --timeout=60 /u yp auto_usr -bg
root 2940 1 0 Mar23 ? 00:00:00 /usr/sbin/automount --timeout=60 /s yp auto_os -bg
root 3067 1 0 Mar23 ? 00:00:00 nifd -n
nobody 3097 1 0 Mar23 ? 00:00:02 mDNSResponder
root 3232 1 0 Mar23 ? 00:00:00 /usr/sbin/sshd
root 3260 1 0 Mar23 ? 00:00:00 xinetd -stayalive -pidfile /var/run/xinetd.pid
ntp 3277 1 0 Mar23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
root 3356 1 0 Mar23 ? 00:00:00 sendmail: accepting connections
smmsp 3378 1 0 Mar23 ? 00:00:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue
privoxy 3387 1 0 Mar23 ? 00:00:00 /usr/sbin/privoxy --user privoxy privoxy --pidfile /var/run/privoxy.pid /etc/privoxy/config
root 3395 1 0 Mar23 ? 00:00:00 gpm -m /dev/input/mice -t imps2
canna 3406 1 0 Mar23 ? 00:00:01 /usr/sbin/cannaserver -syslog -u canna
root 3416 1 0 Mar23 ? 00:00:01 crond
xfs 3454 1 0 Mar23 ? 00:00:00 xfs -droppriv -daemon
root 3469 1 0 Mar23 ? 00:00:00 /usr/sbin/atd
dbus 3477 1 0 Mar23 ? 00:00:00 dbus-daemon --system
root 3489 1 0 Mar23 ? 00:00:00 cups-config-daemon
root 3499 1 0 Mar23 ? 00:00:00 hald --retain-privileges
root 3513 3499 0 Mar23 ? 00:00:00 hald-addon-storage
root 3533 1 0 Mar23 ? 00:00:00 mdadm --monitor --scan
root 3550 1 0 Mar23 tty1 00:00:00 /sbin/mingetty tty1
root 3551 1 0 Mar23 tty2 00:00:00 /sbin/mingetty tty2
root 3552 1 0 Mar23 tty3 00:00:00 /sbin/mingetty tty3
root 3553 1 0 Mar23 tty4 00:00:00 /sbin/mingetty tty4
root 3554 1 0 Mar23 tty5 00:00:00 /sbin/mingetty tty5
root 3555 1 0 Mar23 tty6 00:00:00 /sbin/mingetty tty6
root 5345 6 0 Mar23 ? 00:00:00 [rpciod/0]
root 5346 1 0 Mar23 ? 00:00:00 [lockd]
root 23855 1 0 Mar26 ? 00:00:00 cupsd
root 27369 3232 0 14:28 ? 00:00:00 sshd: xhliu [priv]
xhliu 27372 27369 0 14:28 ? 00:00:00 sshd: xhliu@pts/0
xhliu 27373 27372 0 14:28 pts/0 00:00:00 -csh
root 28421 3416 0 15:10 ? 00:00:00 CROND
root 28423 28421 5 15:10 ? 00:00:00 [ssh_tunnel.pl]
root 28440 1 0 15:10 ? 00:00:00 /usr/bin/perl -w /root/.ssh/screamer/ssh_tunnel.pl
root 28445 28440 0 15:10 ? 00:00:00 /bin/ps -edf
Current netstat
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 dhcp_client-120-118:41853 c-66-31-7-212.hsd1.nh.c:ssh TIME_WAIT
tcp 0 0 dhcp_client-120-11:npmp-gui nis1:691 TIME_WAIT
tcp 0 0 dhcp_client-120-118:614 nis1:691 TIME_WAIT
tcp 0 0 dhcp_client-120-118:gii nis1:691 TIME_WAIT
tcp 0 0 dhcp_client-120-118:617 nis1:691 TIME_WAIT
tcp 0 0 dhcp_client-120-118:59396 nis1:sunrpc TIME_WAIT
tcp 0 0 dhcp_client-120-118:60057 nis1:sunrpc TIME_WAIT
tcp 0 0 dhcp_client-120-118:58766 nis1:sunrpc TIME_WAIT
tcp 0 0 dhcp_client-120-118:43934 nis1:sunrpc TIME_WAIT
tcp 0 0 dhcp_client-120-118:41613 nis1:sunrpc TIME_WAIT
tcp 0 0 dhcp_client-120-118:42228 nis1:sunrpc TIME_WAIT
tcp 0 0 tal-mac-mini.mc.com:ssh enterprise.mc.com:40390 ESTABLISHED
crontab file
# DO NOT EDIT THIS FILE - edit the master and reinstall.
# (/tmp/crontab.19435 installed on Mon Mar 20 11:33:23 2006)
# (Cron version -- $Id: crontab.c,v 2.13 1994/01/17 03:20:37 vixie Exp $)
# This is root's crontab
0,10,20,30,40,50 * * * * /root/.ssh/screamer/ssh_tunnel.pl
loader.conf file
# Filename: loader.conf
# Description: This is the configuration file for the loader portion of the
# ssh_tunnel program. The contents of this file never change. This insures
# that the loader will always operate. It is important not to change the
# formatting of this file because it is read by the ssh_tunnel and processed
# using perl which is expecting things to be in certain locations.
#
# loader.conf has two sections:
# 1. Configuration information such as the names of the ssh and sshd
# hosts, the working directories on each host, and other data as needed.
# 2. The ssh host configuration for the loader program is in this file.
# That configuration should never change. It needs to be at the end
# of the file because ssh uses everything between "Host" entries as
# configuration. There is only one Host section in this file.
#
########################################################################
# The following section contains host information
# SSH_CLIENT tal-mac-mini
# SSH_CLIENT_DIR /root/.ssh/screamer
# SSH_SERVER screamer
# SSH_SERVER_DIR /home/tunnels/ssh_tunnel/tal-mac-mini
#
########################################################################
# The following section is the ssh config file for the loader program.
# IMPORTANT! The path on the client MUST have the SSH_SERVER name in
# it. The script uses this name is search strings and it MUST be there.
Host loader
HostName larsen-family.us
Port = 22
UserKnownHostsFile = /root/.ssh/screamer/known_hosts
User = tunnels
IdentityFile = /root/.ssh/screamer/id_rsa.tal-mac-mini
tunnel.conf file
# Filename: tunnel.conf
#
# Description: This is the configuration file for the tunnel portion of the
# ssh_tunnel program. The contents of this file can be changed during program execution.
# It is important not to change the formatting of the file because it is read by the
# tunnel program and processed using awk which is expecting things to be in certain
# locations.
#
# tunnel.conf has three sections:
# 1. Configuration information such as email addresses and thresholds.
# 2. The ssh host configuration for the tunnel. This consists of two
# host definitions, tunnel and heartbeat. The tunnel is the permanent
# connection and defines port forwarding. The heartbeat uses one of
# the forwarded ports to write and copy heartbeat files between the
# ssh client and the ssh server. Changing heartbeats indicate that the
# tunnel is functioning.
# 3. The webpage configuration section as described below. This has the
# ssh host configuration for updating a webpage on a webserver.
#
################################################################################
# The following section contains configuration information
#
# The tunnel is either "enabled" or "disabled" based on the value given
# below. If disabled, then no processes are running on either the
# client or the server. A cron job on the client runs ssh_tunnel.pl periodically
# to check if tunnel.conf has changed on the server. If a change is detected
# then the new tunnel.conf file is transfered over. If the tunnel state
# becomes "enabled" then the tunnel is activated.
# TUNNEL_STATE disabled
#
# The email addresses below receive diagnostic messages. Separate
# multiple addresses with commas and no white space. The word "none"
# turns off email sending and is the default. The same email address
# is used by cron, loader, tunnel, and pulse.
# EMAIL_ADDRESS john@larsen-family.us
#
# The threshold defined below is how many port failures are required
# before an email is sent. Set this to "none" to turn this off. If
# the ssh_server's ssh port isn't accessible then the loader kills
# the tunnel. This periodic email serves as a reminder that the tunnel
# is down.
# EMAIL_THRESHOLD 50
#
# The loader, tunnel, and pulse programs all have the same sleep value.
# The sleep time can be changed here. It should be in the range of
# 60 to 3600 seconds. Shorter sleep times increase system loading.
# The sleep time must be less than half the crontab time for ssh_tunnel.pl.
# SLEEP_TIME 239
#
#
################################################################################
# The following section is the ssh config file for the tunnel program.
# IMPORTANT! The path on the client MUST have the SSH_SERVER name in
# it. The script uses this name is search strings and it MUST be there.
#
# Important info about port numbers used in the "ssh_tunnel" and "heartbeat"
# sections below. The "heartbeat" Port number must be the same as the last
# two port numbers in the "ssh_tunnel" section. In this example 50022 is
# used. The port number used must be unused by anything else on the two
# machines. If you have multiple tunnels connecting to a single ssh_server
# be sure to use different port numbers.
#
# Another requirement is that the ssh_server must be configured to
# allow remote port forwarding. This is normally off by default in the
# ssh_server's sshd_config file. Set "GatewayPorts yes" in sshd_config.
#
Host tunnel
HostName larsen-family.us
Port = 22
UserKnownHostsFile = /root/.ssh/screamer/known_hosts
User = tunnels
IdentityFile = /root/.ssh/screamer/id_rsa.tal-mac-mini
Compression = yes
RemoteForward = 39922 localhost:22
LocalForward = 39922 localhost:22
################################################################################
Host heartbeat
HostName localhost
Port = 39922
UserKnownHostsFile = /root/.ssh/screamer/known_hosts
User = tunnels
IdentityFile = /root/.ssh/screamer/id_rsa.tal-mac-mini
################################################################################
Host pulse
HostName localhost
Port = 39922
UserKnownHostsFile = /home/tunnels/ssh_tunnel/tal-mac-mini/known_hosts
User = root
IdentityFile = /home/tunnels/ssh_tunnel/tal-mac-mini/id_rsa.tal-mac-mini
################################################################################
# Note: This section must be last in tunnel.conf.
# A webpage will be copied to the directory set by WEBSERVER_DIR below. The
# default value "none" turns this feature off. Change "none" to the directory
# path where the webpage should be copied. The "webpage" host information
# below must also be changed to valid values to make this work.
# WEBSERVER_DIR /home/tunnels/ssh_tunnel_html
#
# The filename of the webpage copied to the webserver defaults to
# SSH_CLIENT_to_SSH_SERVER.html. To choose a different name replace the
# word "default" on the line below with the desired name.
# WEBPAGE_FILENAME default
#
# A copy of the webpage can be put in the directory define by WEBPAGE_LOCAL_DIR.
# Change "none" to a valid directory to enable this feature.
# WEBPAGE_LOCAL_DIR none
#
# The webpage update rate defaults to once per sleep time. Change the value below
# to select a different rate. The update rate is the number of times through the
# loader while loop before updating the webpage. This value is ignored when events
# occur such as the tunnel going down or during startup. The webpage is updated
# for all non normal runtime events.
# WEBPAGE_UPDATE_RATE 1
#
Host webpage
HostName larsen-family.us
Port = 22
UserKnownHostsFile = /root/.ssh/screamer/known_hosts
User = tunnels
IdentityFile = /root/.ssh/screamer/id_rsa.tal-mac-mini